Polycom SOUNDPOINT SIP 2.2.0 - Manual (Page 118)

Administrator’s Guide SoundPoint IP / SoundStation IP
A - 6
• Microbrowser <mb/>
• USB Port <usb/>
Protocol <volpProt/>
This attribute includes:
• Local <local/>
• Server <server/>
• SDP <SDP/>
• SIP <SIP/>
Local <local/>
This configuration attribute is defined as follows:
Polycom recommends that you create another file with your organization’s
modifications. If you must change any Polycom templates, back them up first.
For more information, refer to the “Configuration File Management on SoundPoint
IP Phones” whitepaper at
www.polycom.com/support/voice/ .
Attribute
Permitted
Values
Default Interpretation
volpProt.local.port 0 to 65535 5060 Local port for sending and receiving SIP
signaling packets.
If set to 0 or Null, 5060 is used for the local
port but it is not advertised in the SIP
signaling.
If set to some other value, that value is used
for the local port and it is advertised in the
SIP signaling.