Polycom SOUNDPOINT SIP 2.2.0 - Manual (Page 128)

Administrator’s Guide SoundPoint IP / SoundStation IP
A - 16
Dial Plan <dialplan/>
This configuration attribute is defined as follows:
Note The dial plan is not applied against Placed Call List, VoiceMail, last call return, and
remote control dialed numbers.
Attribute
Permitted
Values
Default Interpretation
dialplan.applyToCallListDial 0, 1 0 This attribute covers dialing from Received
Call List and Missed Call List including dialing
from Edit or Info sub- menus.
If set to 0, the dial plan is not applied against
the dialed number.
if set to 1, the dial plan is applied against the
dialed number.
dialplan.applyToDirectoryDial 0, 1 0 This attribute covers dialing from Directory as
well as Speed Dial List.
Value interpretation is the same as for
dialplan.applyToCallListDial
.
Note: An Auto Call Contact number is
considered a dial from directory.
dialplan.applyToUserDial 0, 1 1 This attribute covers the case when the user
presses the Dial soft key to send dialed
number when in idle state display.
Value interpretation is the same as for
dialplan.applyToCallListDial.
dialplan.applyToUserSend 0, 1 1 This attribute covers the case when the user
presses the Send soft key to send the dialed
number.
Value interpretation is the same as for
dialplan.applyToCallListDial.
dialplan.impossibleMatchHandling 0, 1 or 2 0 If set to 0, the digits entered up to and
including the point where an impossible
match occurred are sent to the server
immediately.
If set to 1, give reorder tone.
If set to 2, allow user to accumulate digits and
dispatch call manually with the Send soft key.
dialplan.removeEndOfDial 0, 1 1 If set to 1, strip trailing # digit from digits sent
out.