Polycom SOUNDPOINT SIP 2.2.0 - Manual (Page 162)

Administrator’s Guide SoundPoint IP / SoundStation IP
A - 50
Call Control <callControl/>
These parameters apply to call control packets, such as the network protocol
signaling.
Basic TCP/IP <TCP_IP/>
This attribute includes:
• Network Monitoring <netMon/>
• Time Synchronization <sntp/>
• Port <port/>
Attribute
Permitted
Values
Default Interpretation
qos.ip.callControl.dscp 0 to 63 or
EF or
any of
AF11,AF12,
AF13,AF21,
AF22,AF23,
AF31,AF32,
AF33,AF41,
AF42,AF43 Null This parameter allows the DSCP of
packets to be specified. If set to a
value this will override the other
qos.ip.callControl
…
parameters. Default of Null which
means the other
qos.ip.callControl
…
parameters will be used.
qos.ip.callControl.min_delay 0, 1 1 If set to 1, set min-delay bit in the IP
TOS field of the IP header, or else
don’t set it.
qos.ip.callControl.max_throughput 0, 1 0 If set to 1, set max-throughput bit in
the IP TOS field of the IP header, or
else don’t set it.
qos.ip.callControl.max_reliability 0, 1 0 If set to 1, set max-reliability bit in
the IP TOS field of the IP header, or
else don’t set it.
qos.ip.callControl.min_cost 0, 1 0 If set to 1, set min-cost bit in the IP
TOS field of the IP header, or else
don’t set it.
qos.ip.callControl.precedence 0-7 5 If set to 1, set precedence bits in the
IP TOS field of the IP header, or
else don’t set them.