National Instruments DAQCard-1200 - Manual (Page 18)

Chapter 2 Installation and Configuration
DAQCard-1200 User Manual 2-2 © National Instruments Corporation
Figure 2-1 shows an example of a typical configuration.
Figure 2-1. A Typical Configuration for the DAQCard-1200
Configuration
The DAQCard-1200 is completely software configurable; refer to your
software manuals to install and configure your software.
If you are using NI-DAQ, refer to your NI-DAQ user manual or function
reference manual. The software installation and configuration instructions
are in Chapter 1. Find the installation and system configuration section for
your operating system and follow the instructions given there.
If you are using LabVIEW, you do not need the NI-DAQ manuals; the
software installation instructions are in your LabVIEW release notes. After
you have installed LabVIEW, refer to the Data Acquisition, VXI, and GPIB
Installation Notes section of Chapter 1, Required Configuration,
Installation, and Upgrade Information of your LabVIEW Version 5.1
Addendum for software configuration instructions.
PCMCIA Socket
Portable
Computer
I/O Cable
NA TION AL IN STRUMENT S
The Software is the Instrument ®
CB-50
I/O Signals