National Instruments GPIB-ENET/100 - Manual (Page 16)

© National Instruments Corporation 2-1 GPIB-ENET/100 for Mac OS
2
Installation
This chapter describes how to install NI-488.2 for Mac OS and the
GPIB-ENET/100.
Installing NI-488.2
Caution Virus detection software might prevent the installer from copying important files
to the System Folder. You must disable or bypass any virus prevention software before
attempting the installation procedure.
Complete the following steps to install NI-488.2 for Mac OS:
1. Insert the NI-488.2 for Mac OS CD and double-click the NI-488.2
Installer icon.
2. Follow the prompts as they guide you through the installation.
3. Restart your Macintosh to complete the installation.
The installation creates a NI-488.2 folder, which includes most of the
NI-488.2 components. The installer places the NI-488 Config file in the
Control Panels folder and the NI-488 INIT and NI-DMA/DSP files in the
Extensions folder.
After you install NI-488.2, you are ready to install the GPIB-ENET/100
hardware.