National Instruments SCXI-1163 - Manual (Page 9)

About This Manual
SCXI-1163 User Manual x © National Instruments Corporation
• The Glossary contains an alphabetical list and description of terms used in this manual,
including abbreviations, acronyms, metric prefixes, mnemonics, and symbols.
• The Index contains an alphabetical list of key terms and topics in this manual, including the
page where you can find each one.
Conventions Used in This Manual
The following conventions are used in this manual:
DIO board DIO board refers to the National Instruments AT-DIO-32F, MC-DIO-24,
MC-DIO-32F, NB-DIO-24, NB-DIO-32F, NB-DIO-96, PC-DIO-24, and
PC-DIO-96 digital I/O data acquisition boards unless otherwise noted.
DIO-type board DIO-type board refers to National Instruments data acquisition boards that
have only digital inputs and outputs. These boards include the DIO-24,
DIO-32F, and DIO-96 boards unless otherwise noted.
italic Italic text denotes emphasis, a cross reference, or an introduction to a key
concept.
Lab board Lab board refers to the National Instruments Lab-LC, Lab-NB, Lab-PC,
and Lab-PC+ boards unless otherwise noted.
MC MC refers to the Micro Channel series computers.
MIO board MIO board refers to the National Instruments AT-MIO-16, AT-MIO-16D,
AT-MIO-16F-5, AT-MIO-16X, AT-MIO-64F-5, MC-MIO-16,
NB-MIO-16, and NB-MIO-16X multichannel I/O data acquisition boards
unless otherwise noted.
MIO-type board MIO-type board refers to National Instruments data acquisition boards that
have at least analog and digital inputs and outputs. These boards include
the MIO boards, the Lab boards, and the PC-LPM-16 board unless
otherwise noted.
monospace Lowercase text in this font denotes text or characters that are to be literally
input from the keyboard, sections of code, programming examples, and
syntax examples. This font is also used for the proper names of disk
drives, paths, directories, programs, subprograms, subroutines, device
names, functions, variables, filenames, and extensions, and for statements
and comments taken from program code.
NB NB refers to the NuBus series computers.
PC PC refers to the IBM PC/XT, the IBM PC AT, and compatible computers.
SCXIbus SCXIbus refers to the backplane in the chassis. A signal on the backplane
is referred to as the SCXIbus <signal name> line (or signal).
The SCXIbus descriptor may be omitted when the meaning is clear.
Descriptions of all SCXIbus signals are given in Appendix C, SCXIbus
Connector.
Slot 0 Slot 0 refers to the power supply and control circuitry in the SCXI chassis.