National Instruments SCXI-1163 - Manual (Page 99)

Index
© National Instruments Corporation Index-3 SCXI-1163 User Manual
SCXI-1351 one-slot cable
extender, E-16
unpacking the SCXI-1163 module, 1-4
interface and routing circuitry, 3-4 to 3-5
INTR* signal, SCXIbus connector, 3-3, CHA3
J
jumper configuration. See also module
configuration; signal connections.
configuration for DIO-type and MIO-
type boards, 2-7
jumper W4, 2-5, 2-6
jumper W5, 2-5, 2-6
jumper W6, 2-5, 2-6
jumpers W2 and W3, 2-5
overview, 2-5
parts locator diagram, 2-2
jumper use, 2-4 to 2-5
reserved jumper
jumper W1, 2-4
user-configurable jumpers, 2-4 to 2-5
jumper W4, 2-4
jumper W5, 2-5
jumper W6, 2-5
jumpers W2 and W3, 2-4
L
LabVIEW software, 1-2
LabWindows software, 1-2
M
manual. See documentation.
MIO-type boards. See also DIO-96,
AT-MIO-16D, and AT-MIO-64F-5
board connection.
configuration, 2-3
digital I/O signal connections, 2-17
jumper configuration, 2-5, 2-7
SCXI-1163, MIO-16, and DIO-24 board
pinout equivalences, E-2
MISO signal
jumper configuration, 2-5 to 2-7
register circuitry, 3-6
SCXIbus connector, 3-3, C-3
writing to Data Register, 3-6
module configuration. See also jumper
configuration; signal connections.
overview, 2-3
parts locator diagram, 2-2
procedure for changing
configuration, 2-3
serial and parallel communication, 2-3
Module ID Register
description, 4-3
jumper connections, 2-6
reading from Module ID Register, 2-23
register circuitry, 3-6
timing diagram, 2-23
MOSI signal
Data Register, 3-6
SCXIbus connector, 3-3, C-3
Slot-Select Register, 4-8
multiple-chassis connections, E-16 to E-17
N
NB5. See SCXI-1351 and NB5 cable.
NI-DAQ software, 1-2 to 1-3
O
operating environment specifications, A-2
operation of SCXI-1163. See theory
of operation.
optically isolated output channels. See
output channels.
Out<0..3> signal, front connector, 2-10, D-3
Out<4..7> signal, front connector, 2-10, D-3
Out<8..11> signal, front connector,
2-10, D-3
Out<12..15> signal, front connector,
2-10, D-3
Out<16..19> signal, front connector,
2-10, D-3
Out<20..23> signal, front connector,
2-10, D-3
Out<24..27> signal, front connector,
2-10, D-3
Out<28..31> signal, front connector,
2-11, D-4
OUT<31..0> bit, Data Register, 4-4
output channels
channel and bank assignments, 3-7
digital output specifications, A-1
optically isolated output channels,
3-6 to 3-7
Output Mode Status Register
description, 4-5
register circuitry, 3-6
P
parallel communication, 2-3
parallel configuration
rear signal connector, 2-16 to 2-17,
B-3 to B-4
selecting parallel mode with jumper
W6, 2-6
Parking Register, 4-6