National Instruments 700 - Manual (Page 19)

Chapter 2 Installation and Configuration
© National Instruments Corporation 2-5 DAQCard-700 User Manual
Digital I/O Configuration
The DAQCard-700 always uses one 8-bit digital output port and one 8-bit digital input port.
Counter Configuration
You can use the MSM82C54 counter/timers for general-purpose applications, such as pulse and
square wave generation, event counting, and pulse-width, time-lapse, and frequency
measurement. For information about configuring the MSM82C54, see the Timing Connections
section of Chapter 3, Signal Connections.