NETGEAR CVG824G - Manual (Page 20)

Wireless Cable Voice Gateway Model CVG824G Reference Manual
1-8 Installing the Gateway
v1.0, November 2006
1. Using the computer that you first used to access your cable modem Internet service, connect to
the gateway by typing http://192.168.0.1 in the address field of your Internet browser.
2. When prompted to log in, enter the user name and password.
• The default parent user name and password are superuser and password, both in lower
case letters.
• The default child user name and password are admin and password, both in lower case
letters.
You are now connected to the gateway.
Connecting to the Internet and VoIP
To configure the gateway to connect to the Internet.
1. From under Setup on the main menu, select Basic Settings. The Basic Settings screen shown
below will display.
Figure 1-4
Note: You can use the parent or child user name and password to install the gateway.
If you plan to set up Parental Control or MAC Filtering, then you need to log in
as the parent.
http://192.168.0.1