Setting up wireless security, Setting up wireless security -6 – NETGEAR CVG824G User Manual
Page 28
Wireless Cable Voice Gateway Model CVG824G Reference Manual
2-6
Wireless Configuration
v1.0, November 2006
•
Security Options: Wireless security is disabled by default. Configure wireless security by
selecting one of the following options:
“WEP (Wired Equivalent Privacy)” on page 2-7
,
“WPA-PSK (WiFi Protected Access Pre-Shared Key)” on page 2-8
Protected Access 2 Pre-Shared Keys)” on page 2-10
5. Click Apply to save your wireless settings.
Setting up Wireless Security
To configure the wireless security settings:
1. Type http://192/168/0/1 in the address field of your browser window.
2. When prompted, enter your User Name and Password. The management user interface will
display.
3. Under the Setup menu, select the Wireless Settings link and scroll down to Security Options.
The Security Options screen will display.
4. Select the Security Option you want to use. (The available security options are explained in the
following sections.
5. Click Apply to save your settings.
Figure 2-2