Factory default settings, Appendix a, Default settings and technical specifications – NETGEAR CVG824G User Manual
Page 71
A-1
1.0, November 2006
Appendix A
Default Settings and Technical Specifications
Factory Default Settings
You can use the reset button located on the front of your device to reset all settings to their factory
defaults. This is called a hard reset.
•
To perform a hard reset, push and hold the reset button for approximately 5 seconds (until the
TEST LED blinks rapidly). Your device will return to the factory configuration settings shown
in the table below.
•
Pressing the TEST LED for a shorter period of time will simply cause your device to reboot.
Feature
Description
Smart Wizard
Enabled
Gateway Login
Gateway Login URL
http://192.168.0.1
Login name
admin
Password
password
Parental login name
superuser
Parental password
password
Internet Connection
WAN MAC Address
Use Default hardware address
MTU Size
1500
Local Network
LAN IP Address (aka Gateway IP address)
192.168.0.1
Gateway Subnet Mask
255.255.255.0
DHCP Server
Enabled
LAN IP Starting IP Address
192.168.0.10