NETGEAR CVG824G - Manual (Page 32)

Wireless Cable Voice Gateway Model CVG824G Reference Manual
2-10 Wireless Configuration
v1.0, November 2006
WPA2-PSK (WiFi Protected Access 2 Pre-Shared Keys)
Not all wireless adapters support WPA2-PSK. Furthermore, client software is required on the
client. Windows XP and Windows 2000 with Service Pack 3 or above do include the client
software that supports WPA2. Nevertheless, the wireless adapter hardware and driver must also
support WPA2. Consult the product document for your wireless adapter and WPA client software
for instructions on configuring WPA settings.
To configure WPA2-PSK:
1. From the Wireless Settings page, select WPA2-PSK (Wi-Fi Protected Access 2 Pre-Shared
Key).
2. In the Pre-Shared Key field under Security Encryption (WPA2-PSK), enter a word or group of
printable characters.
The passphrase must be 8 to 63 characters in length. The 256 Bit key used for encryption is
generated from this passphrase.
3. Enter the Key Lifetime (in minutes).
4. Click Apply to save your settings.
WPA2 (WiFi Protected Access 2)
To configure WPA2:
1. From the Wireless Settings page, select the WPA2 Security Option.
Figure 2-6