NordicTrack None - Manual (Page 12)

10
9. Make sure that all parts are properly tightened before you use the treadmill. To protect the floor or car-
pet, place a mat beneath the treadmill.
8. Attach the Front Cover (17) to the Frame (22) with the
two Cover Screws (2) and four Front Cover Screws
(16).
8
16
17
22
16
2
1. Unplug the power cord. Remove the five Display
Mounting Screws (114) from the back of the Basic
Console (not shown), and remove the Basic Console
from the treadmill. Disconnect all wires connecting the
Basic Console to the treadmill.
2. Insert the wire harness, the TV cable, and the ground
wire into the bottom of the TV console assembly (A) as
you slide the TV Console assembly onto the bracket on
the Handrail (103). Connect the wire harness, the TV
cable, and the ground wire to the back of the TV
Console assembly. Make sure to connect the con-
nectors properly.
Align the indicated five holes in the back of the TV con-
sole assembly (A) with the five holes in the bracket on
the Handrail (103). Attach the TV Console assembly
with five Display Mounting Screws (114). Do not pinch
any wires.
Then, attach the Console Plate (118) to the TV console
assembly (A) with four Console Plate Screws (94).
A
Wire
Harness
Ground
Wires
TV Cable
118
94
103
2
114
If you purchase the Workout TV console, follow the steps below to assemble the console.