Navigon MN 6 - Manual (Page 11)

User’s manual MobileNavigator 6
Operating the navigation software - 9 -
3 Operating the navigation software
3.1 Volume
The volume of the spoken driving instructions from
MobileNavigator 6 can be adjusted during the navigation.
You have started a navigation. The map is in Navigation or
Destination search mode.
1. Tap the button Volume.
The volume bar opens. It contains three buttons for
adjusting the volume.
Louder, Quieter, Sound on/off.
2. Tap the Volume button again.
The volume bar closes.
3.2 Information
Symbols located at the top of the screen are used to display
information.
GPS
The GPS symbol can show the following GPS-reception status:
No GPS The built-in GPS reciever is not operational. Consult
customer service if the problem persists.
No Signal Data is being received from less than three
satellites. The position cannot be calculated.
GPS ready Data is being received from at least three
satellites. The position can be calculated.
Refer to chapter "GPS status" on page 37 for detailed
information regarding the GPS status.