Navigon MN 6 - Manual (Page 24)

User’s manual MobileNavigator 6
- 22 - Destination management
Note: If you change the route options, any changes made also
remain valid for subsequent navigations.
You can get information regarding the individual route profile
settings by clicking on the corresponding (Help) button.
5. Tap the Start navigation button or just start driving.
No GPS reception
When the received GPS signal is not sufficient, the following
message appears: "No GPS signal available at present. Would
you like to use the last known position?"
You have the following possibilities:
▶ Tap OK. The route will be calculated with the last known
position as starting point. As soon as the GPS reception is
sufficient for position determination, the route will be re-
calculated and you can begin the navigation.
▶ Tap Cancel. The M
AIN WINDOW
opens. The destination is
now saved to the L
AST DESTINATIONS
list.
5 Destination management
Every destination that you enter and the destinations from the
L
AST DESTINATIONS
list may be added to the F
AVOURITES
list.
This makes sense if you frequently navigate to a respective
destination.
5.1.1 Saving a destination
1. Enter a destination as described in "Specifying a new
destination" on page 14. Do not tap on the Start
navigation button!
2. Tap .Options > Save destination.
- OR –
1. Enter a destination as described in "L
AST DESTINATIONS ",
page 19. Don't tap the Start navigation button!
2. Tap Options > Save as favourite.
3. Enter a name for the destination.