Navigon MN 6 - Manual (Page 29)

User’s manual MobileNavigator 6
Routes with various stages - 27 -
End simulation
You may stop a simulation at any moment.
1. Tap the (Back) button.
A dialog box will prompt you to confirm the navigation
cancel.
Afterwards, the M
AIN WINDOW
opens.
6.3.3 Starting navigation
You have calculated and displayed a route.
The calculation of a route is based on so called route options.
1. If you want to view or change these options, click on the
Route profile button.
Note: If you change the route options, these remain valid for
subsequent navigations.
You can get information regarding changing individual route
profiles by tapping the corresponding Help buttons.
2. Tap the Start navigation button or simply start driving.
No GPS reception
When the received GPS signal is not sufficient, the following
message appears:
"No GPS signal available at present. Would you like to use the
last known position?"
You have the following possibilities:
▶ Tap OK. The route will be calculated using the last known
position as the starting point. As soon as the GPS reception
is sufficient for determining the position, the route will be
re-calculated and you can begin the navigation.
▶ Tap the Cancel button. The M
AIN WINDOW
opens. The
destination is now saved to the L
AST DESTINATIONS
list.