Navigon MN 6 - Manual (Page 26)

User’s manual MobileNavigator 6
- 24 - Routes with various stages
The starting point is only important if you want to see a
planned route on the map, but currently have no GPS
reception or you are not currently at the planned starting
point. The starting point that you enter therefore has the flow
number "0".
As soon as you begin a navigation, your current location will
be used as the basis for the route calculation.
The first stage is therefore the trip to the route stage with the
flow number "1".
1. Tap on the field Specify starting point.
The S
TARTING POINT
menu opens up.
If you want to enter your current location as the starting point:
2. Tap on the menu point Current position.
If you want to enter a different starting point:
2 Tap on the corresponding button.
3. Enter the starting point according to the relevant section in
chapter "Navigation" on page 12.
4. Tap the button Set starting point.
The selected starting point will now be shown next to
button O (Starting point).
Change the starting point
Tap Specify starting point.
The S
TARTING POINT
menu opens. You can now enter a
different starting point. Proceed as described above.
6.1.2 Enter route stages
Route stages are points within the route that you want to
navigate to.
In front of every route stage is its flow number on a button.
1. Tap on the field Specify route point.
The R
OUTE POINT
menu opens.
2. Tap on the button for the desired destination entry type.
3. Enter the route stage. (See the corresponding section of
chapter Navigation on page 12).
4. Tap Add.