Navigon MN 6 - Manual (Page 36)

User’s manual MobileNavigator 6
- 34 - Working with the map
11
The name of the route section that you need to drive onto
next is shown in the upper street field.
12
The name of the street you are currently driving on is shown
in the lower street field.
Note: The displays for many of the above mentioned areas
can be configured via Options > Settings > Basic settings. A
number of displays only work when the corresponding
information is available on the map.
Note: If you tap on the large arrow field, then the current
route instruction will be repeated.
Tap the (Destination search) in order to view the map
in Destination search mode (See Map in Destination search
mode on page 35).
Quit navigation
Tap (Back), in order to end the navigation. A dialog box
prompts you to confirm.
Map functions in Navigation mode
When the map is open in the Navigation mode, tap any point
on the map. Various buttons with options will be displayed.
2D/3D: Changes between 2D and 3D mode. The symbol of the
currently set mode is shown in orange.
Day/Night: changes the display mode between "day" and "night". The
symbol of the mode currently set is displayed in orange.
Interim destination: Opens the menu for entering a way point.
The navigation will then guide you to this way point. Then you
can simply continue navigation to your original destination.
Skip route point: Tap this icon to omit the next stage from the list.
This button is inactive when less than 2 stages are pending.
Block: Tap this button in order to block a stage, i.e. to re-calculate
the route to avoid the stage, e.g. if you have heard of a traffic
jam relating to this section on the radio.