Navigon MN 6 - Manual (Page 27)

User’s manual MobileNavigator 6
Routes with various stages - 25 -
The selected route stage will now be shown next to its flow
number.
Repeat this step for each additional destination that you want
to add to your route.
6.1.3 Edit route stages
Route stages can be deleted from a route. The order of the
route stages can be varied as you wish.
Note: The start point (flow number "0") can neither be moved
or deleted.
▶ Tap on the route stage that you want to edit.
The context menu contains the following buttons:
Route point up: Moves the selected route stage forwards
(example: route stage 2 becomes route stage 1)
Route point down: Moves the selected route stage back.
(Example route stage 2 becomes route stage 3).
Delete: Deletes the selected route stage. A dialog
window will prompt you to confirm the deletion.
6.2 Managing routes
You can save each planned route under a particular name.
Note: Only the route starting points and the route stages will
be saved, not the calculated route. If you load a route, you will
have to recalculate it before navigation begins.
You can load, rename or delete stored routes.
6.2.1 Save route
The R OUTE PLANNING window is open. You have entered the
starting point and at least one route stage.
1. Tap on Options > Save route.
2. Enter a name for the route.