Navigon MN 6 - Manual (Page 38)

User’s manual MobileNavigator 6
- 36 - Working with the map
Draw the map section from upper left to bottom right. and it
will then zoom to fit the screen size.
Draw the map section from bottom right to top left, and the
map will zoom out.
Pan mode: When this button is active, you can change the
map section with the pen or with your finger. Simply push the
map in the desired direction.
Entire route: Zooms the map so that the entire route is visible.
Current position: Selects the map section shown, so that the
current location is centred.
8.4.1 Working in Destination search mode
1. Tap on the point to which you wish to navigate.
The destination that you have selected appears under the
cross hairs.
The geographical coordinates of the destination and the
corresponding address is shown in the bottom third of the
screen.
2. Tap the (OK) button.
Buttons with various functions will appear.
Take me there: Begins the navigation to the selected point. If you are
currently in a navigation, it will be aborted.
Interim destination: Sets the selected point as way point. The
navigation system will then guide you to this way point first.
Afterwards, you can simply continue your original navigation.
This function is only active when you are currently in a
navigation.
Set as destination: Adds the selected point as the last point in the
route plan. If no route plan has been opened, the selected
point will become the first point in a new route plan.