Navigon MN 6 - Manual (Page 28)

User’s manual MobileNavigator 6
- 26 - Routes with various stages
3. Tap Save.
The destination is now entered into the S
AVED ROUTES
list.
The dialog window closes.
6.2.2 Load route
1. Tap Options > Saved routes.
2. Tap the route that you want to load.
3. Tap the Load route button.
The R
OUTE PLANNING
window opens. The starting point and
the route stages of the loaded route are entered.
6.3 Navigation
The system first has to calculate the route. Afterwards, you
can begin the navigation or just simulate it.
6.3.1 Calculate and display the route
A route may be calculated and displayed on the map even
without GPS reception in order to get an impression on the
itinerary.
The R
OUTE PLANNING
window is open. The starting point and
at least one stage has been entered.
1. Tap the Show route button.
The map screen opens in Preview mode.
The starting point and the route stages are marked by
flags. For each stage, the distance and the estimated trip
time is given. These data are also given for the entire trip.
6.3.2 Simulating the route
You can also just simulate a navigation.
Note: The reception of GPS-signals is not necessary for the
simulation.
Simulation is restricted to routes of 60 mi max.
You have calculated and displayed a route.
2. Tap Options > Simulation.
The route will be recalculated for simulation purposes.
Simulation starts when calculation has finished.