Norton Abrasives C6136 User Manual

Page 20

Advertising
background image

20

Lethal Exhaust: Gas use only in well ventilated areas. Engine
exhaust gases contain poisonous carbon monoxide which is
odorless, colorless, and can cause death if inhaled. Avoid
inhaling exhaust fumes, and never run the engine in a closed
building or confined area.


Use Approved:

Eye Protection

Hearing

Protection

Respiratory

Protection

Head Protection

1. To install the blade follow the instructions located in section A. Installing

the Blade (page 10 to 12) of this manual. Also read and understand this
complete manual beginning.

2. Check the Engine Oil level.

3. Disengage the Self-propelling unit by moving the Transmission

Engage/Disengage lever fully up and place the Forward/Reverse lever in
the neutral position (middle).

4. Raise the saw to the full upright position. Do not let the blade come in

contact with the ground or any object.


5. Maneuver the saw to the desired starting point.

6. If wet cutting connect the water supply to the saw.

7. Follow the instructions for starting the located in section B. Engine

subsection 5. Starting the Engine of this manual (pages 15 to 16).

Advertising
This manual is related to the following products: