Norton Abrasives C6136 - Manual (Page 61)

61
IV. PARTS LIST SECTION
A. Ordering Information
1. List model number and serial number of machine.
2. List part number and serial number of part not the item number.
3. All positions on the machine are from the Operator’s Position when running
the machine
4. Wherever alternate parts are shown due to product improvement, inspect
the part you have and provide additional description as necessary.
5. Specify mode of shipping desired, such as, parcel post, truck, U.P.S., best
way, etc.
For the nearest Norton distributor call 1-800-554-8003
Common Replacement Parts
Description Part Number
Belt Powerband 5/3VX560 Set Of (2)
(14”, 20” and 26” Blade Size Only)
237287
Belt Powerband 5/3VX600 Set Of (2)
(30” and 36” Blade Size Only)
236021
Screw 5/8-11 x 4 Left Hand Thread
(Operators Right Side Of Saw)
N1D0263
Screw 5/8-11 x 4 Right Hand Thread
(Operators Left Side Of Saw)
N1D0073
Collar Tight (Inner Collar or Flange) Ø4-1/2” N1E0017
Collar Loose Assembly With Pin
(Outer Collar or Flange) Ø4-1/2” N1E019
Drive Pin
∅3/8 x 1-1/2
9196112
Bearing Blade Shaft
∅2” (1)
237268
Front Wheel Complete 8 x 3 x 1 w/Bearing(1) N1C0847
Rear Wheel 10 x 3 x 1-1/4 (1) N1C0061
Wrench 1-5/16” N1C0112
Transmission Jackshaft 237322
NOTE: All Parts Are Sold As Individual (each) Unless Noted Otherwise
Blades Use Only Norton Diamond Blades. Contact your local Norton
Distributor or Norton at 1-800-554-8003 for the best blade for the application.