Norton Abrasives C6136 - Manual (Page 55)

55
Too Move the Machine:
When the Transmission Engage/Disengage Lever is engaged, pushing the
Forward/Reverse Lever slowly forward will increase the forward speed of
the saw. Pulling it to the center will place the saw in neutral. The machine
is equipped with a Neutral Lockout. To operate the Forward/Reverse Lever
either: move the lever towards the Operator’s left side then move the
Forward/Reverse Lever to the desired position. Pulling the saw to the rear
of the console (from the neutral) will increase the reverse speed. The S
A. With the machine running, insure that the machine’s
Forward/Reverse Lever is in the Neutral position.
B. Place the Engage/Disengage Lever into the Engage position.
C. Move the Forward/Reverse Lever towards the Operator’s left side
and then move the Forward/Reverse Lever to the desired
position. The machine is equipped with a Neutral Lockout which
prevents the Forward/Reverse Lever from accidentally being
moved from the Neutral Position. Pushing the Forward/Reverse
Lever slowly forward will increase the forward speed of the saw
moving the Forward/Reverse Lever towards the rear of the
machine will increase the reward or reverse speed.
3. Transmission Maintenance:
A. Keep the chain clean and properly adjusted.
B. Keep all linkages properly adjusted.
C. Keep Transmission Belt aligned and in good condition. Replace the belt
if it worn or cracked.
D. Check Rear Axle Drive Gears for:
1. Misalignment
2. Broken Teeth
3. Unusual wear patterns
4. Keep Clean