National Instruments NI PXI-7831R - Manual (Page 19)

Chapter 1 Introduction
© National Instruments Corporation 1-11 NI PXI-7831R User Manual
SHC68-NT-S (NI part #189041-02) connects to the NI PXI-7831R VHDCI
connectors on one end of the cable. The other end of the cable is not
terminated. This cable ships with a wire list identifying which wire
corresponds to which NI PXI-7831R pin. Using this cable, you can quickly
connect the NI PXI-7831R signals that you need to the connector of your
choice without having to connect these signals to the VHDCI connector
end of the cable. Refer to Appendix B, Connecting I/O Signals for the
NI PXI-7831R connector pinouts.
Unpacking
The RIO device is shipped in an antistatic package to prevent electrostatic
damage (ESD) to the device. ESD can damage several components on the
device.
Caution Never touch the exposed pins of connectors.
To avoid such damage in handling the device, take the following
precautions:
• Ground yourself using a grounding strap or by holding a grounded
object.
• Touch the antistatic package to a metal part of the computer chassis
before removing the device
from the package.
Remove the device from the package and inspect the device for loose
components or any sign of damage. Notify NI if the device appears
damaged in any way. Do not install a damaged device into the computer.
Store the RIO device in the antistatic envelope when not in use.
Safety Information
The following section contains important safety information that you must
follow when installing and using the NI PXI-7831R.
Do not operate the NI PXI-7831R in a manner not specified in this
document. Misuse of the NI PXI-7831R can result in a hazard. You can
compromise the safety protection built into the NI PXI-7831R if the
NI PXI-7831R is damaged in any way. If the NI PXI-7831R is damaged,
return it to NI for repair.