Reconfigurable i/o documentation, Related documentation – National Instruments NI PXI-7831R User Manual
Page 8
About This Manual
viii
ni.com
programs, subprograms, subroutines, device names, functions, operations,
variables, filenames and extensions, and code excerpts.
Reconfigurable I/O Documentation
The NI PXI-7831R User Manual is one piece of the documentation set for
your RIO system and application. Depending on the hardware and software
you use for your application, you could have any of several types of
documentation. Use the documentation you have as follows:
•
Where to Start with the NI PXI-7831R—This document lists what you
need to get started, describes how to unpack and install the hardware,
and contains information about connecting signals to the
NI PXI-7831R.
•
NI PXI-7831R User Manual—This manual contains detailed
information about the NI PXI-7831R hardware.
•
LabVIEW FPGA Module Release Notes—This document contains
information about installing and getting started with the FPGA
Module.
•
LabVIEW FPGA Module User Manual—This manual describes how
to use the FPGA Module.
•
LabVIEW Help—This help contains information about using various
virtual instruments (VIs) with the NI PXI-7831R and using the FPGA
Module and the LabVIEW Real-Time (RT) Module.
•
LabVIEW Real-Time Module User Manual—This manual contains
information about how to install and use the RT Module.
Related Documentation
The following documents contain information you might find helpful:
•
NI Developer Zone tutorial, Field Wiring and Noise Considerations
for Analog Signals, at
ni.com/zone
•
PICMG CompactPCI 2.0 R3.0
•
PXI Hardware Specification Revision 2.1
•
PXI Software Specification Revision 2.1