Nortel Networks Server 600r - Manual (Page 23)

Unpacking the 600r server 23
Unpacking the 600r server
Introduction
Follow this procedure to unpack the server and peripherals.
WARNING
Risk of personal injury
The 600r CallPilot server weighs approximately 10 kg (23 lbs) as
shipped from manufacturing. If necessary, and to prevent personal
injury, ask someone to help you unpack and position the server.
To unpack the equipment
ATTENTION
As you unpack each item, check it off against the packing list, as well as against
the following checklists provided in the Installation and Configuration Task List
(NN44200-306):
• CallPilot software media and documentation checklist
• CallPilot server hardware checklist
Step Action
1 Carefully open the cardboard carton containing the server.
2 Remove the server from the carton and place on a secure surface.
3 Carefully open the cartons containing the monitor, keyboard, mouse,
modem, and ELAN Ethernet switch or hub (if supplied), and set the
peripherals aside.
4 Put all manuals, DVD/CD/CDRWs, operating system disks, and any
disks for peripherals in a safe place.
5 Save all packing materials and cartons in case you must return any
equipment to the carrier.
—End—
What is next?
Remove the top cover to inspect the interior of the server. For information
about how to inspect the interior of the server, see
"Inspecting the interior
of server" (page 24) .
Nortel CallPilot
600r Server Hardware Installation
NN44200-307 01.03 Standard
5.0 14 May 2008
Copyright © 2007-2008, Nortel Networks
.