NetComm V110 - Manual (Page 30)

�11��� ��1���� ��11�� ���� User Guide YML881Rev1
� www.netcomm.com.au
Add new Phone
Position Enter the phone number from 0 to 139
name Enter the Speed Dial Name
number Enter the Speed Dial Number
Url Enter the URL, VoIP Phone Number, Remote WAN IP Address of VoIP Gateway
Add Phone
[Button] Add the new Phone which you configured
reset [Button] Reset configured items
examples:
example 1: Position: 0, name: “test iptel”, number: 000, Url: [email protected]
When the user dials the Number 000, it will dial to the VoIP User test who registers to the SIP Server iptel.org.
Be noted that you need also register to the SIP Server iptel.org. If you register to the different SIP Server,
please make sure that the SIP Server allows you dial to iptel.org.
example 2: Position: 1, name: “ip address 10.32”, number: 001, Url: 192.168.10.32
When the user dials the Number 001, it will dial to the VoIP Device whose IP Address is 192.168.10.32.
example 3: Position: 2, name: “ip address 10.32 5062”, number: 002, Url: 192.168.10.132:5062
When the user dials the Number 002, it will dial to the VoIP Device whose IP Address is 192.168.10.132 with
the port 5062.
example 4: Position: 3, name: “john”, number: 003, Url: 88888888
When the user dials the Number 003, it will dial to the VoIP User whose phone number is 88888888.