NetComm V110 - Manual (Page 62)

�11��� ��1���� ��11�� ���� User Guide YML881Rev1
� www.netcomm.com.au
3-Way conferencing
how to Use:
1. Dial the first number.
2. During connection to the first party, perform a hook flash to put the first party on hold.
2. When you hear the dial tone, press #512# on your telephone dial-pad.
3. When you hear the recall dial tone, dial another number and talk with the second person.
4. To conference with both callers at the same time, perform a hook flash.
5. To transfer the second call to first call, perform a hook flash after entering into conferencing mode.
note: If you hang up during conferencing, it will transfer the first call to the second call.
call Waiting
how to Use:
1. When a new call is coming while you are talking, you can push the Flash button or perform a hook flash
to switch to the new call.
2. You can push the Flash button to switch between the two calls.
or
1. Dial the first number to make a conversation.
2. During connection to the first party, push the Flash button or perform a hook flash to put the first party on
hold.
3. When you hear the dial tone, dial another number and talk with the second person.
4. You can push the Flash button or perform a hook flash to switch between the two calls.
call hold
how to Use:
1. When a new call is coming in while you are on an existing call, you can push the Flash button or perform
a hook flash to hold the current call for a while, then push the Hold key again to keep talking.
2. You can push the Flash button to switch between the two calls.