NetComm V110 User Manual
Page 35
YML881Rev1
�11��� ��1���� ��11�� ����
�11��� ��1���� ��11�� ����
User Guide
www.netcomm.com.au
Volume Setting function
You can setup the Handset Volume, PSTN-Out Volume, Handset Gain and the PSTN-In Gain.
options
description
handset Volume:
to set the volume for on your handset.
PStn-out Volume:
(V211 only) is to set the PSTN volume out.
handset Gain:
to set the volume sent out to the other party handset.
PStn-In Gain:
(V211 Only) is to set the volume sent in to your handset from PSTN.
dnd Setting function
The do not disturb feature allows the device to automatically return busy during a specified time period.
Incoming calls may return busy or go to voice mail dependant on the setup of your VSP account.
options
description
dnd Always
When enabled, incoming calls will be blocked and the caller will hear the busy tone.
dnd Period
When enabled, incoming calls will be blocked and the caller will hear the busy tone
when the call is placed during the time period specified below. If the “From” time is
larger than the “To” time, the block time will from day 1 to day 2.
from
Enter the start time of the time period. (24 hours format, hh:mm)
to
Enter the end time of the time period. (24 hours format, hh:mm)