Electromagnetic compatibility, Ce compliance – National Instruments cFP-20xx User Manual
Page 21
© National Instruments Corporation
21
cFP-20xx Quick Start Guide
Electromagnetic Compatibility
This product meets the requirements of the following EMC standards for electrical
equipment for measurement, control, and laboratory use:
•
EN 61326 (IEC 61326): Class A emissions; Basic immunity
•
EN 55011 (CISPR 11): Group 1, Class A emissions
•
AS/NZS CISPR 11: Group 1, Class A emissions
•
FCC 47 CFR Part 15B: Class A emissions
•
ICES-001: Class A emissions
For EMC compliance, operate this device with shielded cabling.
CE Compliance
This product meets the essential requirements of applicable European Directives,
as amended for CE Marking, as follows:
Low-Voltage Directive (safety)......... 2006/95/EC
Electromagnetic
Compatibility
Directive (EMC) ............................... 2004/108/EC
Note
Refer to the Declaration of Conformity (DoC) for this product
for additional regulatory compliance information. To obtain the DoC
for this product, click Declarations of Conformity Information at
ni.com/hardref.nsf
.