National Instruments cFP-20xx - Manual (Page 4)

cFP-20xx Quick Start Guide 4 ni.com
Mounting the Backplane on a Panel
1. Fasten the panel-mount plates to the back of the cFP-BP-x using a number 2
Phillips screwdriver and the 8-32 × 5/16 in. countersink screws shipped with
the kit.
Caution Do not use screws longer than 5/16 in. to fasten the
panel-mount plates to the backplane.
NA TIO NA L
INST RU ME NT S
102 mm
(4 in.)
457 mm (18 in.)