National Instruments cFP-20xx - Manual (Page 7)

© National Instruments Corporation 7 cFP-20xx Quick Start Guide
Caution Do not use screws longer than 5/16 in. to fasten the DIN rail
clip to the backplane.
2. Insert one edge of the DIN rail into the deeper opening of the DIN rail clip.
3. Press down firmly on the backplane to compress the spring until the clip locks
in place on the DIN rail.
4. Connect the PE ground terminal on the cFP-BP-4 to safety ground.
Caution Disconnect power before removing the backplane from the
DIN rail.
NA TIO NA L
INS TR UM EN TS