NetComm HSPA 7.2 MBPS WI-FI ROUTER 3G9W - Manual (Page 11)

2 1 3 5 1
Quick Setup
2.1 Setup Procedure
These steps explain how to quickly setup your router:
1: Attach the two 3G antennas provided to the ports marked Main and AUX on the back of the router. The
antennas should be screwed in a clockwise direction.
2: Insert your SIM card (until you hear a click) into the USIM slot at the back of the Router.
3: Connect the yellow networking cable to one of the yellow ports found at the back of the Router.
4: Connect the other end of the yellow networking cable to the port on your computer.
5: Connect the power adapter to the Power socket on the back of the Router.
6: Plug the power adapter into the wall socket and press the power button into the ON position (in).
7: Configure the router through the Web User Interface (WUI).
NOTE: Chapters 3 through 8 explain how to setup and use the WUI
8: Save the router configuration and reboot (see section 6.4).
11
Telstra Turbo 7 Series Wireless Gateway USER GUIDE
6