NetComm HSPA 7.2 MBPS WI-FI ROUTER 3G9W - Manual (Page 75)

3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE
YML902 – 75
Configure basic Wireless LAN features
Description: Configure basic wireless LAN features such as enable or disable the wireless LAN
interface, hide the network from active scans, set the wireless network name (also known as
SSID) and restrict the channel set based on country requirements.
Synopsis:
wlan config [--enable <0|1>] [--hide <0|1>]
[--ssid <ssidStr>] [--country <countryStr>]
[--isolate <0|1>]
[--channel <channelVal>] [--rate <rateVal>]
[--mrate <rateVal>]
[--rts <rtsThreshold>] [--frag <fragThreshold>]
[--dtim <dtimInterval>] [--beacon <beaconInterval>]
[--xpress <on|off>] [--gmode <auto|performance|lrs|802.11b>]
[--gprotect <off|auto>] [--preamble <long|short>]
Options:
--enable <0|1>
Description: Enable or disable wireless LAN interface.
Valid value: 0 or 1
0 – disabled the wireless LAN interface.
1 – enabled the wireless LAN interface.
Default value: 1
--hide <0|1>
Description: Hide wireless LAN network name (SSID).
Valid value: 0 or 1
0 – not hide wireless LAN SSID.
1 – hide wireless LAN SSID
Default value: 0
--ssid <ssidStr>
Description: Set Wireless LAN network name (SSID).
Valid value: 32 characters string
--country <countryStr>
Description: Set Wireless LAN Country, only accept abbreviation.
Valid value: 2 or 3 characters string (AUSTRALIA is abbreviated to AU).