NetComm HSPA 7.2 MBPS WI-FI ROUTER 3G9W User Manual
Page 20
20 – YML902
4.1.1 Profile Setup
Your Service Provider will provide the information required to complete the first time setup instructions below.
This includes profile, username and password. Only complete those steps for which you have information and
skip the others.
1. If your SIM card is not inserted into the gateway, then do so now.
2. Type the APN in the APN field. If you have not received a username and password, leave these fields empty.
3. Click the Save button to save the new settings and reboot the Gateway. .
4. After reboot, the Device Info for 3G network box in the WUI Basic screen should indicate an active connection,
as shown below. The 3G and Internet LEDs on the front panel of the Gateway should also be blinking.
If the LEDs are off, then either your profile settings are incorrect, the SIM card is not working or the service
network is unavailable. In either case, contact Technical Support for further instructions.
NOTE:
If the LEDs light in an on/off pattern moving from left to right this indicates that your SIM is PIN Locked, please lee PIN Lock Off on
page 21 for instruction on how to fix this