NetComm HSPA 7.2 MBPS WI-FI ROUTER 3G9W - Manual (Page 76)

76 – YML902
--isolate <0|1>
Description: Set wireless devices isolation. When enabled, wireless devices connected to the router
will not be able to communicate to each other
Valid value: 0 or 1
0 – not isolate wireless devices.
1 – isolate wireless devices
Default value: 0
--channel <channelVal>
Description: Set the wireless LAN channel.
Valid value: 0~14
0 means auto select channel.
Default value: 0
--rate <rateVal>
Description: Set the wireless LAN data rate.
Valid value: 0, 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 (Mbps)
0 means auto
Default value: 0
--mrate <rateVal>
Description: Set the wireless LAN Multicast rate.
Valid value: 0, 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 (Mbps)
0 means auto
Default value: 0
--rts <rtsThreshold>
Description: Set the wireless LAN RTS threshold.
Valid value: 0~2347
Default value: 2347