NetComm HSPA 7.2 MBPS WI-FI ROUTER 3G9W - Manual (Page 40)

40 – YML902
6.2.2 IP Address
The IP Address option limits local access by IP address. When the Access Control Mode is enabled, only the
IP addresses listed here can access the device. Before enabling Access Control Mode, add IP addresses with
the Add button.
On this screen, enter the IP address of a local PC which you wish to allow permission. Click Save/Apply to
continue.
6.2.3 Passwords
The Passwords option configures your account access password for your Router. Access to the device is
limited to the following three user accounts:
•
admin is to be used for local unrestricted access control
• support is to be used for remote maintenance of the device
• user is to be used to view information and update device firmware
Use the fields illustrated in the screen below to change or create your password. Passwords must be 16
characters or less with no spaces. Click Save/Apply to continue.