NetComm HSPA 7.2 MBPS WI-FI ROUTER 3G9W - Manual (Page 42)

42 – YML902
6.4 Save and Reboot
This function saves the current configuration settings and reboots your Router.
NOTE1: It may be necessary to reconfigure your TCP/IP settings to adjust for the new configuration. For example, if you disable the
Dynamic Host Configuration Protocol (DHCP) server you will need to apply Static IP settings.
NOTE2: If you lose all access to your web user interface, simply press the reset button on the rear panel for 5-7 seconds to restore
default settings.