Nortel Networks 8010co - Manual (Page 33)

33
Installing the Breaker Interface Panel for the Ethernet Routing Switch 8010co Chassis
Chapter 2
Installation
This chapter describes how to install the breaker interface panel and covers the
following topics:
• “Preparing to install the breaker interface panel ” next
• “Installing the breaker interface panel” on page 36
• “Verifying the installation” on page 62
Preparing to install the breaker interface panel
Before begin the installation, verify that:
• Your shipment is complete and undamaged.
• You have the cables, tools, and other equipment that you need.
• Your installation site meets the physical, electrical, and environmental
requirements (see
Appendix A, “Technical specifications,” on page 73 ).
The sections that follow help you prepare for installation.
Note: For a list of requirements that must be met for the 8010co chassis,
see the appropriate product chassis installation manual.