Nortel Networks 8010co - Manual (Page 67)

67
Installing the Breaker Interface Panel for the Ethernet Routing Switch 8010co Chassis
Chapter 3
Problem solving
This chapter describes how to isolate and diagnose problems with your breaker
interface panel and associated 8010co chassis.
This chapter covers the following topics:
• “Interpreting the LEDs ” (next)
• “Diagnosing and correcting the problem” on page 70
• “Corrective actions” on page 71
The topics lead you through a logical process for troubleshooting the BIP and the
associated 8010co chassis components. The BIP LEDs provide visual indications
of problems that can occur with the 8010co chassis and installed components, as
well as system status during normal operations.
To become familiar with the various states that the LEDs can exhibit during
normal operation, go to the next section,
“Interpreting the LEDs” on page 68 .
For help in determining a problem, go to “Diagnosing and correcting the problem”
on page 70 . That section describes symptoms and corrective actions you can
perform to resolve specific problems.
If the corrective actions determine that a chassis component needs replacing, see
the appropriate product chassis installation manual for replacement and removal
procedures.
If you still have problems with your system after completing the instructions in
this chapter, contact the Nortel Technical Solutions Center.