Nortel Networks 8010co - Manual (Page 44)

44 Chapter 2 Installation
312755-G Rev 00
9 Attach the lug end of a 125-inch power supply cable to the positive terminal
on the power supply (
Figure 26 ).
Use a 7/16-inch hex wrench to fasten the hardware in the correct order.
Figure 26 Attaching the positive lead
+DC
4
1 = Two-hole crimp lug
2 = Lock washer (x 2) 3 = Hex nut (x 2)
4 = Positive lead wire
3
2
1
-DC
10429FA