Nortel Networks ICS 6.1 - Manual (Page 105)

96
Modular ICS 6.1 Programming Record P0603536 02
•• Park mode Select whether the system will use Call Park codes in a sequence from lowest
to highest, or use the lowest numbered code that is available when the call is
parked.
•• Trnsfr callbk Select the number of times a transferred call rings before it returns to the
telephone that transferred it.
•• DRT to prime Select whether to automatically transfer unanswered external calls to a prime
telephone.
•• DRT delay Select the number of times a call rings before Delayed Ring Transfer
transfers it to a prime telephone. This setting only appears if DRT to prime is
Yes.
•• Held reminder Select whether the telephone reminds you when a call is on hold.
•• Remind delay Select the number of seconds before the telephone reminds you that a call is
on hold. The setting only appears if Held reminder is Yes.
•• Directd pickup Select whether users can answer calls at any telephone using the directed
call pickup feature (
²àß
).
•• Page tone Select whether users can hear a Page Announcement tone (
²ßâ
) over
the system.
•• Page Timeout Select the number of seconds before a Page is automatically disconnected.
•• Daylight time Select whether daylight savings time is automatically applied to the system
clock.
•• AutoTime&Date Select whether time and day will automatically display.
•• SWCA Cntrl This feature provides 16 feature codes which allow you to park calls on the
system. If these codes are assigned to memory buttons with indicators in a
group of telephones, then incoming calls can be assigned to the buttons and
maintain a call appearance for the group, while freeing up the line for
additional calls.
••• Auto Associate Use this command to determine if calls are automatically assigned to a free
SWCA key.
••• Invoke by Hold Use this command to determine if calls are automatically assigned to a free
SWCA key if they are put on Hold.
•• Call log space Customize how Call log space is allocated to telephones in the system.
••• Reset all logs? Use this command to confirm that you want to reallocate the Call log space
equally to all telephones in your system.
•• Host delay Select the delay, in milliseconds, between the selection of an outgoing line
and the moment that Norstar sends dialed digits or codes on that line.
•• Link time
•• AlarmSet Enter the DN of the telephone used to display alarm messages when a
problem occurs in the Norstar system.
•• Set relocation Select whether telephones in the system can be moved without losing their
programming.
•• Msg reply enh Select whether to provide light message waiting lamps or a stuttered dialtone
on selected analog telephones on specially equipped ASMs.
•• Ans. key: Allows you to assign up to eight answer keys. Settings are Basic, Enhanced,
and Extended.