Nortel Networks ICS 6.1 User Manual
Page 96
87
P0603536 02
Modular ICS 6.1 Programming Record
•••••• Voice Deny:F88
Use to prevent the set from receiving voice calls.
•••••• MCID:F897
ESTI lines only: If service is active from the service provider, this feature
saves current caller information at the service provider system.
•••••• Language:F*501
Select the display language. (501 = first language; 502 = second language;
503 = third language
•••••• Sil Mon:F*550
Allows users at a supervisor terminal to monitor external Hunt group calls.
•••••• Contrast:F*7
Use to adjust contrast of display
•••••• Static time:F806
Change the first line of the display to the current time and date.
•••••• Call:F*520 .... F*535
These 16 System-wide Call Appearance (SWCA) feature codes can be
programmed onto memory buttons with indicators to provide call parking
within a group of telephones that share the same SWCA button assignment.
••• User speed dial
Use these commands to program user speed dialers. (codes: 256 to 279)
••• Call log opt’ns
Select whether the set will log all calls, no calls, or only unanswered calls.
••• Dialing opt’ns
Select standard dial, pre-dial, or automatic dial.
••• Language
Choose the display language: English, French or Spanish.
Note: Language choices depend on system setup.
••• Display cntrst
Select a display contrast level.
••• Ring type
Select a ring type.
•• Restrictions
Use these commands to create and assign restriction filters. These filters are
used to prevent a user from making certain kinds of calls from a telephone
during normal or scheduled operation periods.
••• Restrn filters
••• Set restrns
Select restrictions for specific set or all sets.
•••• Filters
Choose the filter you want to program.
••••• Normal
••••• Night
••••• Evening
••••• Lunch
••••• Sched 4
••••• Sched 5
••••• Sched 6
For each line, enter the number (two-digits) of the restriction filter to apply
during normal service and each of the schedules.
•••• Set lock
Select the level of personal programming and customizing that can be
performed at a telephone.
•••• Allow last no
Select whether a telephone can use Last Number Redial (
²Þ
).
•••• Allow saved no
Select whether a telephone can use Saved Number Redial (
²ßà
).
•••• Allow link
Select whether a telephone can use Link (
²àÚ
) to access the features
of a private branch exchange.