Nortel Networks ICS 6.1 - Manual (Page 95)

86
Modular ICS 6.1 Programming Record P0603536 02
•••••• Show time:F803 Use to display the time and date while on a call.
•••••• Wait:Dial:F804 Use to program an external autodial number to cause the system to wait to
receive dial tone from another system before proceeding with the dialing
sequence.
•••••• Ringing Call:F807
•••••• Long Tones: F808 Use to generate a tone for the period you hold down a button to communicate
with devices such as faxes and answering machines.
•••••• Call Info:F811 Use to display the name, number, or line name of a ringing or held call.
•••••• Call Log:F812 Display the call information for a set.
•••••• Logit:F813 Store caller information for your current call in the Call Log of the set.
•••••• Offer rej:F814
•••••• Log O’flow:F815 Also referred to as Autobumping. Use to delete the oldest log item from the
Call Log of the set.
•••••• ONN block:F819 Use to block your name/number from being transmitted as part of the call
information package.
•••••• Camp-on:F82 Use to reroute a call to another set that already has busy lines.
•••••• Privacy:F83 Use to enable or disable privacy setting, which allows or blocks another
telephone from choosing the line you are using.
•••••• Line Redire:F84 Use to redirect external calls to a telephone external to your system.
Note: Not all lines or telephones support this feature.
•••••• DND:F85 Use either to:
• block ringing of all incoming calls, except priority calls
• block an incoming priority call if you are currently on a call
•••••• Music:F86 Use to listen to music from the external music source through your telephone
speaker if you are not on a call. Note: Customer-supplied hardware must be
installed for this feature to work.
•••••• Srvc Stat:F870 Display the services that have been turned on at a designated control set.
•••••• Ring Srvc:F871 Turn on one of six schedules for alternative ringing/call answer arrangements
from a designated control telephone.
•••••• Rstrn Srvc:F872 Turn on one of six services for restrictions on particular lines or telephones
from a designated control telephone. You need the System Coordinator
password.
•••••• Route Srvc:F873 Turn on one of six services for routing on particular lines on telephones from
a designated control telephone. You require the System Coordinator
password.
•••••• Alarm:F875 Use this from a room set to program a wake-up alarm.
•••••• Rm cndition:F876 Use this command from a room set to update the room condition setting.
•••••• Alarm admin:F877 Use from a Hospitality administrative set to set a wake-up alarm for a specific
room.
•••••• Rm cond adm:F878 Use from a Hospitality administrative set to see the room condition of a
specific room.
•••••• Rm occ adm:F879 Use from a Hospitality administrative set to see the room occupancy of a
specific room.