Nortel Networks ICS 6.1 User Manual

Page 111

Advertising
background image

102

Modular ICS 6.1 Programming Record

P0603536 02

Telco features

These commands allow you to assign settings for external voice messaging
services.

• VMsg ctr tel#s

These commands allow you to determine which voice message center the set
will use, and how it will access the network.

•• VMsg center 1

•• VMsg center 2

•• VMsg center 3

•• VMsg center 4

•• VMsg center 5

Choose the voice message center you want the set to use.

••• Use: line| routing tbl

Select whether the set will access the voice message center over a direct line,
or through a routing table.

•••• Tel#

Enter up to a 24-number telephone number that accesses the voice
messaging center.

• ONN blocking

Allows outgoing name and number to be blocked at the called party end on
both analog and digital lines.

•• Analog VSC

Analog Vertical service code.

••• Tone

Vertical service code for analog tone dialing trunks.

••• Pulse

Vertical service code for analog pulse dialing trunks.

•• BRI VSC

Basic Rate Interface Vertical service code.

••• Code:

Enter the BRI code.

Software keys

These commands allow you to set up access to optional features and
services through Nortel Networks programming.

• SysID

This number can be viewed on any M7324, M7310, T7316 or T7316E display.
Record the number. You will be asked to provide this number when you call
the Nortel Customer Response Center.

• Password keys

Keys are required for some system expansion activities and to activate the
remote monitoring capability. To obtain the required keys for ISDN PRI, and
fixed access trunks/WAN access for Data Modules, call the Nortel Customer
Response Center at: 1-800-684-5825.
Note: An ISDN PRI key is required for MCDN networking.

•• Key 1

Enter the eight-digit password.

•• Key 2

Enter the eight-digit password.

•• Key 3

Enter the eight-digit password.

Hardware

Use these commands to view and configure the Trunk Cartridges and BRI
Cards installed in the ICS.

• Show module:_

Indicate the module you wish to view.

• Cards on KSU

View and program the cartridges and cards installed in the ICS.

•• Cd1-KSU

View the type of card that occupies the right-most slot in the ICS.

••• Card type

The display shows the current card type.

••• Lines

View the line-number range for the lines on a Trunk Cartridge.

••• Show lines ___

Advertising