Nortel Networks ICS 6.1 - Manual (Page 94)

85
P0603536 02 Modular ICS 6.1 Programming Record
•••••• Pg Zone All:F610
•••••• Page Zone 1:F611
•••••• Page Zone 2:F612
•••••• Page Zone 3:F613
•••••• Page Zone 4:F614
•••••• Page Zone 5:F615
•••••• Page Zone 6:F616
Page internally by zone.
Zone 0 pages all zones.
•••••• Page Spkr:F62 Page through an external loudspeaker system.
•••••• Pg All, Spkr:F630
•••••• Page Spkr+1:F631
•••••• Page Spkr+2:F632
•••••• Page Spkr+3:F633
•••••• Page Spkr+4:F634
•••••• Page Spkr+5:F635
•••••• Page Spkr+6:F636
Page through both sets and external loudspeaker system by zone.
Zone 0 pages all zones.
•••••• Line Pool:F64 Gives you access to line pools. Press this feature, then enter a line pool
access code.
•••••• Reply Msg:F65 Use to view and reply to messages.
•••••• #Msg. Wait:F#65 Use to view number of message waiting.
•••••• Voice Call:F66 Initiate a call/announcement through the speakers of another set without first
ringing the set.
•••••• Saved No.:F67 Use during a call to save a number for later redialing.
•••••• Rst O’ride:F68 Use to override restrictions to allow entry of a COS password. Effective for
current call, only.
•••••• Priority:F69 Use to interrupt a call on another set.
•••••• Transfer:F70 Use to transfer a call to another internal or external set.
•••••• Link:F71 Use to generate a link signal to access a PBX or other host exchange.
•••••• Call Park:F74 Use to put a call on hold that can be picked up at any other set. The display
shows a three-digit retrieval code.
•••••• Grp Pickup:F75 Use to answer a call that is ringing at another set. External calls are answered
in sequence.
•••••• Dir Pickup:F76 Use to answer a call to your set from another set.
•••••• Call Timer:F77 Use to display the duration of current or most recent call.
•••••• Pause:F78 Use to program a pause (1.5 second) delay into an external autodial
sequence.
•••••• Excl. Hold:F79 Use to put a group call on hold. The call shows busy on all other sets in the
group.
•••••• Trunk Answr:F800 Use to answer an external call that is ringing on a line that has been placed
into a Ringing Service schedule. This feature does not work for a private line.
•••••• Call Queue:F801 Use to answer the next call.
•••••• Grp. Listen:F802 Use to receive to both the speakers and the handset on a set.