I. preparation – Norton Abrasives C9 User Manual

Page 7

Advertising
background image

7

I. PREPARATION

B. Assembly


The compact concrete saws are shipped completely assembled and ready for
use except for diamond blade, gasoline, oil, and handle bar. Inspect the saw
for shipping damage. If any damage is found, contact the shipper
immediately and file a freight claim. The Norton Company is not responsible
for any freight-related damages. Remove the saw from the pallet. Reverse
the position of the handlebars so that the handle bar sticks out towards the
operator. Adjust the handlebars to the desired height. Attach the handlebars
to the saw with the supplied hardware. Read and understand the remaining
sections of this Owners Manual. NOTE: Do not install the blade until it is
time to use the saw. ANSI regulations prohibit the transportation of any
concrete saw with the blade installed.

Advertising