Norton Abrasives C9 - Manual (Page 8)

8
C. C9 Series Concrete Saw Specifications
Dimensions/Weight
Length (Working) 50” (1270 mm)
Length (Transport) 40.5” (1029 mm)
Width 20.5” (521 mm)
Height 41” (1041 mm)
Weight 195 lbs (88.6 kg)
Engine
Engine Mfg. Honda
Model GX270
Spec No.
GX270K1QXC9
Engine Type Single Cylinder 4 Cycle
Horse Power 9 hp (6.65 kW) @ 3,600 rpm
Max Torque 19.5 ft-lbs (26.5 Nm, 2.7 kg-m) @ 2,500 rpm
Cooling System Air
Oil Capacity 1.1 liter (1.16 US qt)
Fuel Capacity 6.5 liter (1.79 US gal)
Fuel Type Unleaded Gasoline (86 pump octane)
Low Oil Sensor Yes
Air Filtration Four Stage Cyclone
Characteristics
Max Blade
∅14” (356 mm)
Depth of Cut 5.75” (146 mm)
14” (356 mm) 4.75” (121 mm)
12” (305 mm) 3.75” (95 mm)
Arbor Bore 1” (25.4 mm)
Blade Shaft Locking Device Machined Into Flats Of Tight Collar
Blade Shaft Speed 2850 rpm
Depth Control Hand Wheel With Screw Feed
Depth Lock Standard
Depth Gauge Customer Installed Accessory
Number Of V-Belts 3
Blade Guard Type Hinged, All Steel Construction
Right or Left Side Cutting Yes
Lifting Bale Built In
Handle Bars Adjustable, Stays Level At All Times
Water Tank Standard
Water Tank Capacity 5.28 US Gallons (20 liter)
Water Hose Connector Standard Garden Hose With Flow Control Valve
Recessed Rear Wheels Standard
Sound pressure
1
88 db(A)
Sound power
1
105 db(A)
1) the sound measures have been made following pr EN 12638, Annex A; 2)“ Floor sawing, grooving and milling machines – Safety “