NetComm IP DSLAM - Manual (Page 45)

NetComm NCT240 Management Guide Release 1.0
Time
This command can display and set system’s time.
Syntax: time <show | set>
¾ show – display system time
¾ set – set system time
Command usage:
¾ set time use this format hh:mm:ss
¾ NCT240 uses 24 hours format
BAS/sys>time
The system's current time
Usage:
time <show| set>
show Display the system's current time.
set Set the system's time.
time command
Date
This command can display and set system’s date.
Syntax: date <show | set>
¾ show – display system date
¾ set – set system date
44